Skip to content

Before the job

How to recognise good work.

Anyone letting somebody into their living room has the same worry: visible cables, holes in the wrong place, a device nobody can operate afterwards. This page says what to look for — with us and with anyone else.

The eight points

What makes an installation clean

Television in a wall recess, no cables visible

No cable stays visible

Power and signal belong behind the wall or in trunking, the socket behind the device. A bundle of cables below the television tells you somebody drilled too early.

Television on a low sideboard with soundbar

The height is right when seated

The centre of the picture sits at the eye level of a seated person — usually lower than it feels right while hanging it. Mount too high and you spend years with your neck stretched.

Wall panel flush with the plaster

Controls that overwhelm nobody

One button on the wall, labelled in your own words. If guests and grandparents cannot find the light, the installation is not finished, it is complicated.

Tidy living room with the loudspeakers kept out of sight

Technology that disappears into the room

Loudspeakers belong where they sound right, and should not draw attention. Where the building allows it, they disappear into the ceiling, the wall or the furniture.

Calibrating the television

Calibrated, not just switched on

Out of the box every television is tuned for the shop floor: too bright, too cold, too colourful. An hour of calibration brings more than the next model up.

Loudspeakers for several rooms

One system instead of four islands

Music in the kitchen, the bathroom and on the terrace belongs in one set of controls. Four apps for four rooms is not multiroom, it is four separate devices.

Smart lock on the front door

The door is part of it

Lock, doorbell and camera work with the same system — otherwise a second one appears, with its own account, its own app and its own source of faults.

Tidy home screen

Handing over means explaining

At the end the accounts are set up, the home screen is tidy and the remote controls are in the drawer. We leave once you have done it yourself once.

How it runs

How an installation comes about

  1. 01

    A conversation at your place

    We look at the room, measure the seating distances and hear what bothers you today. It takes an hour and prevents most wrong purchases.

  2. 02

    A proposal on one page

    What goes where, what it does, what it costs. Without catalogue pages and without technology nobody asked for.

  3. 03

    Preparation

    Lines, sockets and mounts are settled with your electrician before anybody drills. Whatever is missing behind the wall becomes a building site later.

  4. 04

    Installation in one day

    Cover, mount, connect, tidy up. We leave the room as we found it — only with an installation in it.

  5. 05

    Calibration and handover

    Picture and sound are set to the room, the controls are set up and explained. After that we stay reachable, well beyond the final invoice.

Swipe for more →

Let's talk about your room

A conversation at your home, without obligation. Afterwards you know what is possible and what it takes.